Mesoporous Titania: Synthesis, Properties and Comparison with Non-Porous Titania

Some relevant physico-chemical and photocatalytic properties of ordered mesoporous TiO2 as obtained by template-assisted synthesis methods are reported. After a review of the crucial aspects related to different synthesis procedures reported by the literature, the focus is pointed on the (often) superior physico-chemical properties of ordered mesoporous TiO2 with respect to (commercial) bulk TiO2. Those are essentially higher specific surface area and ordered mesoporosity; possibility to control the formation of different crystalline phases by varying the synthesis conditions and possibility to obtain films, nanoparticles with different morphologies and/or materials with hierarchical porosity. Although mesoporous TiO2 is extensively studied for many applications in the fields of photocatalysis, energy and biomedicine, this chapter focuses on the use of mesoporous TiO2 in environmental photocatalysis, by putting in evidence how the physico-chemical properties of the material may affect its photocatalytic behaviour and how mesoporous TiO2 behaves in comparison with commercial TiO2 samples

Probing gas adsorption in zeolites by variable-temperature IR spectroscopy: An overview of current research

The current state of the art in the application of variable-temperature IR (VTIR) spectroscopy to the study of (i) adsorption sites in zeolites, including dual cation sites; (ii) the structure of adsorption complexes and (iii) gas-solid interaction energy is reviewed. The main focus is placed on the potential use of zeolites for gas separation, purification and transport, but possible extension to the field of heterogeneous catalysis is also envisaged. A critical comparison with classical IR spectroscopy and adsorption calorimetry shows that the main merits of VTIR spectroscopy are (i) its ability to provide simultaneously the spectroscopic signature of the adsorption complex and the standard enthalpy change involved in the adsorption process; and (ii) the enhanced potential of VTIR to be site specific in favorable cases

Application of reverse micelle sol-gel synthesis for bulk doping and heteroatoms Surface Enrichment in Mo-Doped TiO 2 nanoparticles

TiO 2 nanoparticles containing 0.0, 1.0, 5.0, and 10.0 wt.% Mo were prepared by a reverse micelle template assisted sol-gel method allowing the dispersion of Mo atoms in the TiO 2 matrix. Their textural and surface properties were characterized by means of X-ray powder diffraction, micro-Raman spectroscopy, N 2 adsorption/desorption isotherms at -196 °C, energy dispersive X-ray analysis coupled to field emission scanning electron microscopy, X-ray photoelectron spectroscopy, diffuse reflectance UV-Vis spectroscopy, and ζ-potential measurement. The photocatalytic degradation of Rhodamine B (under visible light and low irradiance) in water was used as a test reaction as well. The ensemble of the obtained experimental results was analyzed in order to discover the actual state of Mo in the final materials, showing the occurrence of both bulk doping and Mo surface species, with progressive segregation of MoO x species occurring only at a higher Mo content

Undoped and Fe-Doped Anatase/Brookite TiO2 Mixed Phases, Obtained by a Simple Template-Free Synthesis Method: Physico-Chemical Characterization and Photocatalytic Activity towards Simazine Degradation

For the first time, Fe-doping (0.05, 1.0, and 2.5 wt.% Fe) was performed on a high-surface-area anatase/brookite TiO2 by adopting a simple template-free sol-gel synthesis followed by calcination at a mild temperature. The powders’ textural and surface properties were characterized by following a multi-technique approach. XRD analysis showed that the anatase/brookite ratio slightly varied in the Fe-doped TiO2 (from 76.9/23.1 to 79.3/22.7); Fe doping noticeably affected the cell volume of the brookite phase, which decreased, likely due to Fe3+ ions occupying interstitial positions, and retarded the crystallite growth. N2 sorption at −196 °C showed the occurrence of samples with disordered interparticle mesopores, with an increase in the specific surface area from 236 m2 g−1 (undoped TiO2) to 263 m2 g−1 (2.5 wt.% Fe). Diffuse Reflectance UV-Vis spectroscopy showed a progressive decrease in the bandgap energy from 3.10 eV (undoped TiO2) to 2.85 eV (2.5 wt.% Fe). XPS analysis showed the presence of some surface Fe species only at 2.5 wt.% Fe, and accordingly, the ζ-potential measurements showed small changes in the pH at the isoelectric point. The photocatalytic degradation of simazine (a persistent water contaminant) both under UV and simulated solar light was performed as a probe reaction. Under UV light, Fe-doping improved simazine degradation in the sample at 0.05 wt.% Fe, capable of degrading ca. 77% simazine. Interestingly, the undoped TiO2 was also active both under UV and 1 SUN. This is likely due to the occurrence of anatase/brookite heterojunctions, which help stabilize the photogenerated electrons/holes

Effective Inclusion of Sizable Amounts of Mo within TiO2 Nanoparticles Can Be Obtained by Reverse Micelle Sol-Gel Synthesis

Six Mo/TiO2 samples (with 0, 1.0, 2.5, 5.0, 7.5, and 10 wt % Mo nominal contents) were obtained by reverse micelle sol-gel synthesis, followed by calcination at 500 °C. The samples were characterized by means of powder X-ray Diffraction (PXRD), quantitative phase analysis as obtained by Rietveld refinement, field-emission scanning electron microscopy (FE-SEM) coupled with energy-dispersive X-ray analysis, N2 adsorption/desorption at -196 °C, X-ray photoelectron spectroscopy, and diffuse reflectance (DR) UV-vis spectroscopy. As a whole, the adopted characterization techniques showed the inclusion of a sizeable Mo amount, without the segregation of any MoO x phase. Specifically, PXRD showed the occurrence of anatase and brookite with all the studied samples; notwithstanding the mild calcination temperature, the formation of rutile occurred at Mo wt % ≥2.5 likely due to the presence of brookite favoring, in turn, anatase to rutile transition. DR UV-vis and XP spectroscopies allowed determining the samples' band gap energy (E g) and valence band energy, respectively, from which the conduction band energy was calculated; and the observed E g value increase at 10 wt % Mo was ascribed to the Moss-Burstein effect

Pure and Fe-doped mesoporous titania catalyse the oxidation of acid orange 7 by H2O2 under different illumination conditions: Fe doping improves photocatalytic activity under simulated solar light

A sample of mesoporous TiO2 (MT, specific surface area = 150 m2\uc2\ub7g\ue2\u88\u921) and two samples of MT containing 2.5 wt.% Fe were prepared by either direct synthesis doping (Fe2.5-MTd) or impregnation (Fe2.5-MTi). Commercial TiO2 (Degussa P25, specific surface area = 56 m2\uc2\ub7g\ue2\u88\u921) was used both as a benchmark and as a support for impregnation with either 0.8 or 2.5 wt.% Fe (Fe0.80-IT and Fe2.5-IT). The powders were characterized by X-ray diffraction, N2 isotherms at \ue2\u88\u92196\ue2\u97\ua6C, Energy Dispersive X-ray (EDX) Spectroscopy, X-ray Photoelectron Spectroscopy (XPS), Diffuse Reflectance (DR) ultra-violet (UV)-Vis and M\uc3\ub6ssbauer spectroscopies. Degradation of Acid Orange 7 (AO7) by H2O2 was the test reaction: effects of dark-conditions versus both UV and simulated solar light irradiation were considered. In dark conditions, AO7 conversion was higher with MT than with Degussa P25, whereas Fe-containing samples were active in a (slow) Fenton-like reaction. Under UV light, MT was as active as Degussa P25, and Fe doping enhanced the photocatalytic activity of Fe2.5-MTd; Fe-impregnated samples were also active, likely due to the occurrence of a photo-Fenton process. Interestingly, the Fe2.5-MTd sample showed the best performance under solar light, confirming the positive effect of Fe doping by direct synthesis with respect to impregnation

Spin-Coated vs. Electrodeposited Mn Oxide Films as Water Oxidation Catalysts

Manganese oxides (MnOx), being active, inexpensive and low-toxicity materials, are considered promising water oxidation catalysts (WOCs). This work reports the preparation and the physico-chemical and electrochemical characterization of spin-coated (SC) films of commercial Mn2O3, Mn3O4 and MnO2 powders. Spin coating consists of few preparation steps and employs green chemicals (i.e., ethanol, acetic acid, polyethylene oxide and water). To the best of our knowledge, this is the first time SC has been used for the preparation of stable powder-based WOCs electrodes. For comparison, MnOx films were also prepared by means of lectrodeposition (ED) and tested under the same conditions, at neutral pH. Particular interest was given to -Mn2O3-based films, since Mn (III) species play a crucial role in the electrocatalytic oxidation of water. To this end, MnO2-based SC and ED films were calcined at 500 C, in order to obtain the desired -Mn2O3 crystalline phase. Electrochemical impedance spectroscopy (EIS) measurements were performed to study both electrode charge transport properties and electrode–electrolyte charge transfer kinetics. Long-term stability tests and oxygen/hydrogen evolution measurements were also made on the highest-performing samples and their faradaic efficiencies were quantified, with results higher than 95% for the Mn2O3 SC film, finally showing that the SC technique proposed here is a simple and reliable method to study the electrocatalytic behavior of pre-synthesized WOCs powders